MOT Status
ExpiredMileage
105,232 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
offside front floor corroded
under body/components has surface corrosion
Parking brake requirements just met
front and rear under body/components surface corrosion
nearside front (sill surface corrosion)
offside front (sill surface corrosion)
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Rear Brake performance unable to be tested brake effort to low (1.2.1 (g))
Central heat shield slightly damaged/insecure
Nearside Front sill surface corrosion
Nearside Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front sill surface corrosion
Offside Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
front and rear under body/components surface corrosion
parking brake requirements just met
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill, behind wheel arch cover (5.3.6 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Headlamp levelling device inoperative (4.1.5 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill, behind wheel arch cover (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm 1.58mm (4.1.E.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Rear Exhaust system not adequately supported (7.1.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear coil spring broken (2.4.C.1a)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
VF55 YVN is a 2006 Mazda 3 in Red with a 1,598cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 71.4%.
Across all 2006 Mazda 3 models, the average MOT pass rate is 74.6% with a typical mileage of 70,278 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying VF55 YVN, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 20 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of VF55 YVN?
You can check the full history of VF55 YVN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was VF55 YVN registered?
VF55 YVN is a 2006 Mazda 3, first registered on 25 February 2006.
Is VF55 YVN safe to buy?
The MOT history for VF55 YVN shows 21 tests with a 71.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does VF55 YVN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on VF55 YVN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.