2008 Honda Cr-v

Exhaust mounting defective Centre to rear joint (6.1.2 (a))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Side repeater not working (4.4.1 (a) (ii))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Exhaust mounting defective Centre to rear joint (6.1.2 (a))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Exhaust emissions exceed manufacturer's specified limit 0.77 (8.2.2.2 (a))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Side repeater not working (4.4.1 (a) (ii))

Windscreen washer provides insufficient washer liquid both sides (3.5 (a))

Nearside Front Tyre has ply or cords exposed 245/45/19 102y (5.2.3 (d) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Central Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge at 1.6mm (5.2.3 (e))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Rear Exhaust flange excessively corroded.

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Nearside Rear Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Nearside Rear Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge at 1.6mm (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Offside Headlamp light intensity severely reduced refit bulb correctly (4.1.4 (a))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Windscreen washer provides insufficient washer liquid top up fluid (3.5 (a))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Centre to rear exhaust flange badly corroded

Nearside Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement Both front arm rear most (5.3.4 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Centre to rear exhaust flange badly corroded

Direction indicator incorrect colour Both rear (4.4.3 (a))

Nearside Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Suspension arm pin or bush worn but not resulting in excessive movement Both front arm rear most (5.3.4 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Windscreen wiper does not clear the windscreen effectively Both (3.4 (b) (ii))

Nearside Front Anti-roll bar ball joint has slight play droplink (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 2mm & edge worn smooth (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre has a cut but not deep enough to reach the ply or cords outer sidewall & 3mm (5.2.3 (d) (i))

Offside Front head light bulb intensity slightly reduced.

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Position lamp not working (4.2.1 (a))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Child Seat fitted not allowing full inspection of adult belt ()

Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Nearside Front Outer Brake pad(s) less than 1.5 mm thick uneven pad wear across axle (3.5.1g)

Offside Headlamp aim beam image kick up to the offside (1.8)

Offside Rear Tyre has ply or cords exposed also below minimum legal limit (4.1.D.1b)

Offside Rear Tyre has ply or cords exposed also below minimum legal limit (4.1.D.1b)

Child Seat fitted not allowing full inspection of adult belt ()

Nearside Front Tyre worn close to the legal limit on 1.6 mm and bold on edges (4.1.E.1)

Offside Front Tyre worn close to the legal limit on 2.0mm with bold edges (4.1.E.1)

Offside Rear Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Tyre worn close to the legal limit 1.6mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit 2mm inner edge (4.1.E.1)

Offside Rear Tyre worn close to the legal limit 2mm inner edge (4.1.E.1)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

both front shockers rubber dust covers split

covers on both front shockers ripped

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)