1960 Morris Mini

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement rubber bush (5.3.4 (a) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement rubber bush (5.3.4 (a) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Brake pedal has insufficient reserve travel all (1.1.2 (a))

Front Windscreen wiper not working (3.4 (a))

Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Exhaust system insecure (6.1.2 (a))

Rear Parking brake lever ratchet not holding correctly (1.1.6 (a))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Front Upper Suspension rod pin or bush likely to become detached BUMP STOP (5.3.4 (a) (ii)) DANGEROUS

Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement rubber bush (5.3.4 (a) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement rubber bush (5.3.4 (a) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear wheel bearing has slight play (2.6.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Direction indicator not working (1.4.A.2c)

Offside Stop lamp not working (1.2.1b)

Registration plate lamp not working (1.1.C.1d)

Windscreen wiper not operating automatically when switched on (8.2.1b)

Offside Rear wheel bearing has slight play (2.6.2)

Nearside Front Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

centre exhaust mount broken but not insecure.

Brake pedal creeps down when held under pressure (3.3.B.1a)

Nearside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front front brake binding (3.7.B.1)

Offside Front Direction indicators not working (1.4.A.2c)

Offside Rear Direction indicators not working (1.4.A.2c)

Offside Rear wheel bearing has excessive play (2.6.2)

Rear Brake valve insecurely mounted (3.6.A.2a)

Windscreen wiper not operating automatically when switched on (8.2.1b)

front brake application uneven (3.7.B.2)

Nearside Front Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

centre exhaust mount broken but not insecure.

bump stop missing front nearside

rear wheel bearings slight free play

An item not tested (Manual)

Exhaust system not adequately supported (7.1.1)

Exhaust system not adequately supported (7.1.1)

Front Windscreen wiper not operating automatically when switched on (8.2.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

bump stop missing front nearside

rear wheel bearings slight free play

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Windscreen wiper blade missing (8.2.2)

Nearside Front Lower Ball joint has excessive play (2.2.B.1f)

Offside Front Lower Ball joint has excessive play (2.2.B.1f)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear rear brake recording little or no effort (3.7.B.5a)