1979 Rover Mini

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Wheel/tyre protruding beyond wheel arch All ()

Offside Front Headlamp aim too high (4.1.2 (a))

slight play rear top mounts

wiring under vehicle has slight damage

Battery insecure (1.9.1)

Brake pipe excessively chafed (3.6.B.2c)

Centre Lower Brake pipe inadequately supported (3.6.B.1)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Headlamp incorrect colour (1.7.5b)

Nearside Front Headlamp insecure (1.7.3)

Nearside Front Steering rack gaiter insecure (2.2.D.2d)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Electrical wiring damaged and bare wires exposed (1.9.2c)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Headlamp incorrect colour (1.7.5b)

Offside Front Headlamp insecure (1.7.3)

Offside Front Steering rack gaiter insecure (2.2.D.2d)

Offside Front Steering rack gaiter split (2.2.D.2d)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Brake cable has wires broken and is significantly weakened (3.5.1b)

Offside Rear Passenger's seat cannot be secured in the upright position. (6.2.A.2)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Outer Exhaust has a major leak of exhaust gases (7.1.2)

Parking brake mechanism/associated mounting prescribed area is excessively corroded (3.1.9)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Side repeater slightly discoloured (1.4.A.2f)

Offside Front Side repeater slightly discoloured (1.4.A.2f)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Steering column modified, but not inappropriately (2.2.C.1e)

advise corotion to nsf and osf a pillars

different size tyres on front and rear axles

nsr wheel bearing slight noise

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Brakes imbalanced across an axle (3.7.B.5b)

Horn not working (1.6.2a)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Steering rack gaiter deteriorated (2.2.D.2d)

Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front Steering rack gaiter deteriorated (2.2.D.2d)

Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

o/s/r sill seam split

Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

o/s/r sill seam split

Offside Front Steering rack gaiter deteriorated (2.2.D.2d)

Steering column top bearing slightly worn (2.1.2c)

o/s/f inner wheel arch shows signs of wheel rub

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Stop lamp not working (1.2.1b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front Steering rack gaiter deteriorated (2.2.D.2d)

Steering column top bearing slightly worn (2.1.2c)

o/s/f inner wheel arch shows signs of wheel rub

o/s/f sill corroded and holed

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Outer Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

all front suspension slightly corroded

floor pan slightly corroded

o/s/f sill corroded

Fuel tank leaking (7.2.3)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Rear wheel bearing rough when rotated (2.6.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Outer Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

all front suspension slightly corroded

floor pan slightly corroded

o/s/f sill corroded

Nearside Ball joint has slight play (2.2.B.1f)

both front tyres sidewalls cracking, no rear seats fitted

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Horn not working (1.6.2a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear registration plate insecure (6.3.1b)

Nearside Ball joint has slight play (2.2.B.1f)

both front tyres sidewalls cracking, no rear seats fitted

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front Seat belt insecurely fixed to the vehicles structure (5.2.1a)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

All position lamps not in good working order (function impaired) (1.1.A.2a)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Exhaust system not adequately supported (7.1.1)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Rear Direction indicator flashing less than 60 times a minute (1.4.A.2g)

Offside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Stop lamp not working (1.2.1b)

Offside Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Tyre worn close to the legal limit (4.1.E.1)

nail in tyre

Nearside Front All position lamps not working (1.1.A.3b)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Inner Indicator tell tale inoperative (1.4.A.2a)

Nearside Rear All position lamps not working (1.1.A.3b)

Offside Front All position lamps not working (1.1.A.3b)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear All position lamps not working (1.1.A.3b)

Offside Rear Registration plate lamp not working (1.1.C.1d)