MOT Status
ExpiredMileage
89,520 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside floor pan excessively corroded but is not within a prescribed area
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))
Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Windscreen washer not working (3.5 (a))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside floor pan excessively corroded but is not within a prescribed area
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Seat belt not functioning as intended jammed (7.1.2 (c))
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Offside Front Brake pipe inadequately clipped to rear (3.6.B.1)
Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Front Lower Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Exhaust system not adequately supported centre and rear (7.1.1)
Headlamp not working on dipped beam both (1.7.5a)
Offside Rear fog lamp missing (1.3.2a)
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Windscreen washer provides insufficient washer liquid (8.2.3)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Lower Front suspension has slight play in a lower suspension ball joint trunion (2.5.B.1a)
Offside Rear Upper Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Battery insecure (1.9.1)
Nearside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings castle rail area (6.1.B.2)
Nearside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner wheelarch (6.1.B.2)
Nearside Rear Rear position lamp(s) incorrect colour (1.1.A.3e)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear rear brake application uneven lower (3.7.B.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen wiper blade missing (8.2.2)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Upper Brake master cylinder/servo mounting prescribed area is excessively corroded wheel arch (3.6.C.3)
Offside Rear Suspension spring mounting prescribed area is inadequately repaired (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded door shut (5.2.6)
Offside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings castle rail (6.1.B.2)
Offside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings jacking point (6.1.B.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt both front outer (2.2.C.1c)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive boot floor (2.4.A.3)
Steering rack gaiter deteriorated both (2.2.D.2d)
brake disc worn, pitted or scored, but not seriously weakened both front (3.5.1i)
coil spring corroded both front (2.4.C.1b)
front bumper poorly welded on
Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)
Offside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)
Offside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Nearside Front Headlamp aim too low (1.8)
Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Front Headlamp aim too low (1.8)
Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
Rear Registration plate lamp not working (1.1.C.1d)
Nearside Front Body has a projection caused by corrosion (6.1.C.1)
Nearside Front Headlamp aim too low (1.8)
Nearside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Offside Front Headlamp aim too low (1.8)
Offside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Rear Registration plate lamp not working (1.1.C.1d)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Front Headlamp aim too low (1.8)
Nearside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Front Headlamp aim too low (1.8)
Offside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Rear Body has a projection caused by corrosion (6.1.C.1)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Rear Registration plate lamp not working (1.1.5c)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
How Reliable is the MG B?
Based on 191,608 MOT tests across 19,443 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
VJS 430W is a 1981 MG B in Green with a 1,798cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 50%.
Across all 1981 MG B models, the average MOT pass rate is 76.2% with a typical mileage of 52,343 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a MG B fails its MOT is windscreen washer provides insufficient washer liquid, accounting for 5,224 recorded failures. If you're considering buying VJS 430W, it's worth having these areas checked by a mechanic before committing.
The MG B typically stays on UK roads for around 63 years. At 45 years old, this MG B is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of VJS 430W?
You can check the full history of VJS 430W by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was VJS 430W registered?
VJS 430W is a 1981 MG B, first registered on 27 April 1981.
Is VJS 430W safe to buy?
The MOT history for VJS 430W shows 26 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does VJS 430W have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on VJS 430W. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.