MOT Status
ValidMileage
151,501 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake load sensing valve stiff (1.1.17 (c) (ii))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive inner arches (5.3.6 (a) (i))
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Play in steering rack inner joint(s) ()
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear brake backing plates are badly corroded
Registration plate deteriorated but not likely to be misread (0.1 (b))
backing sills are showing signs of corrosion
bonnet slam panel is badly corroded
reverse lights are inoperative
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Brake load sensing valve stiff (1.1.17 (c) (ii))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive inner arches (5.3.6 (a) (i))
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Play in steering rack inner joint(s) ()
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear brake backing plates are badly corroded
Registration plate deteriorated but not likely to be misread (0.1 (b))
backing sills are showing signs of corrosion
bonnet slam panel is badly corroded
reverse lights are inoperative
Brake load sensing valve stiff (1.1.17 (c) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive top strutt area under bonnet (5.3.6 (a) (i))
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge inside edge (5.2.3 (e))
bonnet slam panel is corroded
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Brake load sensing valve stiff (1.1.17 (c) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive top strutt area under bonnet (5.3.6 (a) (i))
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge inside edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
bonnet slam panel is corroded
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Hazard warning switch faulty (4.4.2 (a) (i))
Offside side repeater lens missing
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Trailer electrical socket insecure (4.10 (a) (i))
bonnet slam panel corroded
Horn not working (7.7 (a))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inside the wheel arch (5.3.6 (a) (i))
Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Hazard warning switch faulty (4.4.2 (a) (i))
Offside side repeater lens missing
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Trailer electrical socket insecure (4.10 (a) (i))
bonnet slam panel corroded
Hazard warning switch faulty (4.4.2 (a) (i))
Offside side repeater lens is missing
Rear Brake pipe corroded, covered in grease or other material across the rear axle (1.1.11 (c))
Trailer electrical socket insecure (4.10 (a) (i))
bonnet slam panel is corroded
Parking brake efficiency below requirements (1.4.2 (a) (i))
Hazard warning switch faulty (4.4.2 (a) (i))
Offside side repeater lens is missing
Rear Brake pipe corroded, covered in grease or other material across the rear axle (1.1.11 (c))
Trailer electrical socket insecure (4.10 (a) (i))
bonnet slam panel is corroded
Central Rear Seat belt retracting mechanism defective (7.1.2 (e))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger area (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer/backing sill (5.3.6 (a) (i))
Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger/floor (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer/backing sill (5.3.6 (a) (i))
Rear Vehicle structure is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached (6.1.6 (i) (ii)) DANGEROUS
Hazard warning switch faulty (4.4.2 (a) (i))
Rear Shock absorbers has slight external damage to the casing both (5.3.2 (b))
Trailer electrical socket wiring insulation damaged or deteriorated (4.10 (b) (i))
under bonnet and slam panel are corroded
Central Rear Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Front Suspension component mounting prescribed area is corroded but not considered excessive subframe mounting areas (5.3.6 (a) (i))
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front inner wheel arch is corroded
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Trailer electrical socket insecure (4.10 (a) (i))
corrosion in the outer and backing sills
the under bonnet and slam panel is corroded
under body and suspension components are showing signs of corrosion
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Headlamp aim too low (4.1.2 (a))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Central Rear Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Front Suspension component mounting prescribed area is corroded but not considered excessive subframe mounting areas (5.3.6 (a) (i))
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front inner wheel arch is corroded
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Trailer electrical socket insecure (4.10 (a) (i))
corrosion in the outer and backing sills
the under bonnet and slam panel is corroded
under body and suspension components are showing signs of corrosion
Central Rear Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Rear Tyre worn close to legal limit/worn on edge inside edge (5.2.3 (e))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
outer and backing sills
slam panel and bonnet is corroded
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Rear chassis is corroded
Rear valance is corroded
slam panel is badly corroded
Central Rear Seat belt damaged (7.1.2 (b) (i))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS
Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Rear chassis is corroded
Rear valance is corroded
slam panel is badly corroded
Nearside Front Subframe mounting prescribed area is excessively corroded chassis (2.4.A.3)
Nearside Front Subframe mounting prescribed area is excessively corroded inner wing (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded chassis (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded inner wing (2.4.A.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Parking brake: efficiency below requirements (3.7.B.7)
Central Rear Seat belt damaged but webbing not significantly weakened (5.2.2a)
Body has slight corrosion (6.1.B.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Vehicle structure has slight corrosion (6.1.B.2)
wipers smear slightly
Brake load sensing valve seized (3.6.E.3)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Body has slight corrosion (6.1.B.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Vehicle structure has slight corrosion (6.1.B.2)
wipers smear slightly
Body has slight corrosion (6.1.B.2)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Vehicle structure has slight corrosion (6.1.B.2)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Parking brake: efficiency below requirements (3.7.B.7)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Body has slight corrosion (6.1.B.2)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Vehicle structure has slight corrosion (6.1.B.2)
Body has slight corrosion (6.1.B.2)
Nearside Vehicle structure has slight corrosion (6.1.B.2)
Offside Vehicle structure has slight corrosion (6.1.B.2)
offside inner rack joint has play
Body has slight corrosion (6.1.B.2)
Nearside Front Direction indicator not working (1.4.A.2c)
Nearside Headlamp aim too low (1.8)
Nearside Vehicle structure has slight corrosion (6.1.B.2)
Offside Vehicle structure has slight corrosion (6.1.B.2)
offside inner rack joint has play
Vehicle structure has slight corrosion (6.1.A.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Stop lamp not working (1.2.1b)
Vehicle structure has slight corrosion (6.1.A.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
both front tyres in poor condition
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
front brake juddering severely (3.7.A.2b)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
both front tyres in poor condition
both rear tyres worn on inner edge
rear exhaust in poor condition
Hazard warning switch faulty (1.4.B.1d)
Offside Headlamp not working on dipped beam (1.7.5a)
both rear tyres worn on inner edge
rear exhaust in poor condition
Non obligatory mirror damaged
Vehicle structure has slight corrosion (6.1.B.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
rear brake disc
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Offside Headlamp not working on dipped beam (1.7.5a)
Non obligatory mirror damaged
Vehicle structure has slight corrosion (6.1.B.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
rear brake disc
Rear brake disc slightly pitted (3.5.1h)
Front brake disc excessively pitted (3.5.1h)
Offside Stop lamp not working (1.2.1b)
Front Brake pad(s) wearing thin (3.5.1g)
Rear brake disc slightly pitted (3.5.1h)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Emissions not tested (7.0)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Rear brake disc excessively scored (3.5.1h)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear brake disc excessively scored (3.5.1h)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
VK02 DWO is a 2002 Mercedes-benz Vito in Green with a 2,151cc diesel engine. This vehicle has been through 38 MOT tests with a personal pass rate of 52.6%.
Across all 2002 Mercedes-benz Vito models, the average MOT pass rate is 65.4% with a typical mileage of 110,245 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying VK02 DWO, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 24 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of VK02 DWO?
You can check the full history of VK02 DWO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was VK02 DWO registered?
VK02 DWO is a 2002 Mercedes-benz Vito, first registered on 7 May 2002.
Is VK02 DWO safe to buy?
The MOT history for VK02 DWO shows 38 tests with a 52.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does VK02 DWO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on VK02 DWO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.