2006 Mazda 3

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outter sill (7.1.1 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill two places (5.3.6 (a) (i))

Rear Exhaust system insecure (6.1.2 (a))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Sub-frame corroded but not seriously weakened corroded (5.3.3 (b) (i))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources missing (4.7.1 (b) (i))

Offside floor to sill corroded

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Rear Exhaust system insecure (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened corroded (5.3.3 (b) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources missing (4.7.1 (b) (i))

Offside floor to sill corroded

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

suspension / rear and front chassis front and rear very rusty corroded

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Inner brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front Headlamp aim too low (1.8)

Offside Rear Registration plate lamp insecure (1.1.C.1c)

Offside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

suspension / rear and front chassis front and rear very rusty corroded

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Wheel nut(s) missing (4.2.A.1e)

Offside Headlamp aim too low (1.8)

Offside Registration plate lamp not working (1.1.C.1d)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Front brake disc worn, pitted or scored, but not seriously weakened inner sides (3.5.1i)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre tread depth below requirements of 1.6mm Also perished to cords (4.1.E.1)

Offside Rear Tyre has ply or cords exposed Perished (4.1.D.1b)

Front brake disc worn, pitted or scored, but not seriously weakened inner sides (3.5.1i)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Trailing arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Trailing arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Exhaust system not adequately supported (7.1.1)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Trailing arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Trailing arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

front brake discs slight pitted.

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)