MOT Status
ValidMileage
247,816 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive o/s and n/s (5.3.6 (a) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Central Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Central Rear subframe corroded
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement formost bush (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement formost bush (5.3.4 (a) (i))
Front Lower Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
Rear Exhaust has a minor leak of exhaust gases exhaust join (6.1.2 (a))
Rear Subframe mounting prescribed area is corroded but not considered excessive subframe (5.3.6 (a) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement both trailing arms (5.3.4 (a) (i))
Front Lower Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
Rear Exhaust has a minor leak of exhaust gases exhaust join (6.1.2 (a))
Rear Subframe mounting prescribed area is corroded but not considered excessive subframe (5.3.6 (a) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement both trailing arms (5.3.4 (a) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Slight blow on rear exhaust
Offside Rear Exhaust has a minor leak of exhaust gases tail pipe joint (6.1.2 (a))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Exhaust leaks from both nearside & offside rear exhaust silencer sealing joints to mid section-just passable on emissions at time of test
Nearside Rear tyre on 2mm tread depth (legal limits 1.6mm)
Offside Front tyre worn unevenly & close to exposing ply on inner tread pattern
Offside Rear brake pads wearing thin compared to remaining 3 other pads-monitor
Offside Rear tyre on 2mm tread depth (legal limits 1.6mm)
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Position lamp not working (4.2.1 (a))
Exhaust leaks from both nearside & offside rear exhaust silencer sealing joints to mid section-just passable on emissions at time of test
Nearside Rear tyre on 2mm tread depth (legal limits 1.6mm)
Offside Front tyre worn unevenly & close to exposing ply on inner tread pattern
Offside Rear brake pads wearing thin compared to remaining 3 other pads-monitor
Offside Rear tyre on 2mm tread depth (legal limits 1.6mm)
Offside Front tyre worn inner edge
Rear Exhaust has a minor leak of exhaust gases deteriorated and slight blow (7.1.2)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front tyre worn inner edge
Offside Rear Registration plate lamp not working (1.1.C.1d)
Rear Exhaust has a minor leak of exhaust gases deteriorated and slight blow (7.1.2)
Nearside Front Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Registration plate lamp not working (1.1.C.1d)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear offside tyre worn on inner edge
Nearside Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
VK08 ZDG is a 2008 Mazda 6 in Blue with a 1,998cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 71.4%.
Across all 2008 Mazda 6 models, the average MOT pass rate is 71.4% with a typical mileage of 87,272 miles. This vehicle is performing in line with others of the same year.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying VK08 ZDG, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 18 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of VK08 ZDG?
You can check the full history of VK08 ZDG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was VK08 ZDG registered?
VK08 ZDG is a 2008 Mazda 6, first registered on 31 March 2008.
Is VK08 ZDG safe to buy?
The MOT history for VK08 ZDG shows 21 tests with a 71.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does VK08 ZDG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on VK08 ZDG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.