MOT Status
ExpiredMileage
84,616 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
fuel pipes corroded
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
fuel pipes corroded
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
fuel pipes corroded
Emissions unable to be completed (8.2.1.2 (d))
Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Service brake efficiency below requirements (1.2.2 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
fuel pipes corroded
Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced around the body mounting area (6.1.1 (c) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced around the body mounting area (6.1.1 (c) (i))
Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced around the central body mounting area (6.1.1 (c) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced around the body mounting area (6.1.1 (c) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced around the body mounting area (6.1.1 (c) (i))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced around the central body mounting area (6.1.1 (c) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear fuel pipes corroded
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Service brake efficiency below requirements (1.2.2 (a) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced around the body mounting area (6.1.1 (c) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced around the body mounting area (6.1.1 (c) (i))
Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced around the central body mounting area (6.1.1 (c) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced around the body mounting area (6.1.1 (c) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced around the body mounting area (6.1.1 (c) (i))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced around the central body mounting area (6.1.1 (c) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear fuel pipes corroded
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Windscreen wiper blade insecure (8.2.2)
Offside Brake pipe excessively corroded front to rear (3.6.B.2c)
Front Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Windscreen wiper blade insecure (8.2.2)
Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Suzuki Jimny?
Based on 677,512 MOT tests across 43,507 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
VK12 OKT is a 2012 Suzuki Jimny in Blue with a 1,298cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 61.1%.
Across all 2012 Suzuki Jimny models, the average MOT pass rate is 82.5% with a typical mileage of 38,581 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Suzuki Jimny fails its MOT is brake pipe excessively corroded, accounting for 18,210 recorded failures. If you're considering buying VK12 OKT, it's worth having these areas checked by a mechanic before committing.
The Suzuki Jimny typically stays on UK roads for around 28 years. At 14 years old, this Suzuki Jimny is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of VK12 OKT?
You can check the full history of VK12 OKT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was VK12 OKT registered?
VK12 OKT is a 2012 Suzuki Jimny, first registered on 29 March 2012.
Is VK12 OKT safe to buy?
The MOT history for VK12 OKT shows 18 tests with a 61.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does VK12 OKT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on VK12 OKT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.