MOT Status
ExpiredMileage
160,925 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Front Coil spring corroded And rear both sides (5.3.1 (b) (i))
Front Headlamp lens slightly defective Both sides faded (4.1.1 (b) (i))
Front Service brake binding but not excessively (1.2.1 (f))
Front Suspension arm corroded but not seriously weakened Both sides (5.3.3 (b) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Wheel arch has a hole and wheel arch corroded (6.1.1 (c) (i))
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Rear Position lamp with a multiple light source up to 1/2 not functioning Both sides (4.2.1 (a) (i))
Rear Shock absorbers has a slightly worn bush Both sides (5.3.2 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Coil spring corroded Both sides (5.3.1 (b) (i))
Front Suspension arm corroded but not seriously weakened Both sides (5.3.3 (b) (i))
Nearside Rear Inner Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Wheel arch (6.1.1 (c) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Rear Coil spring corroded Both sides (5.3.1 (b) (i))
Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Rear Shock absorbers has a slightly worn bush Both sides (5.3.2 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Coil spring corroded Both sides (5.3.1 (b) (i))
Front Suspension arm corroded but not seriously weakened Both sides (5.3.3 (b) (i))
Nearside Rear Inner Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Rear Coil spring corroded Both sides (5.3.1 (b) (i))
Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Rear Shock absorbers has a slightly worn bush Both sides (5.3.2 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Lower Suspension arm corroded but not seriously weakened Both sides (5.3.3 (b) (i))
Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Emissions not tested (7.3.A.1)
Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too low (1.8)
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Registration plate lamp not working (1.1.C.1d)
front brake excessively fluctuating (3.7.B.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Headlamp aim too low (1.8)
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Registration plate lamp not working (1.1.C.1d)
Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i) DANGEROUS
Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i) DANGEROUS
Front Brake pad(s) wearing thin (3.5.1g)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp aim too high (1.8)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim not tested (1.8.A.1c)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
advise on nearside offside rear tyres upon wear bars recom end to be changed
advise on rear silencer corrossion started
advise rear brake pads getting low
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Subaru Legacy?
Based on 349,986 MOT tests across 31,204 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
VK52 VJA is a 2003 Subaru Legacy in Green with a 1,994cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 71.4%.
Across all 2003 Subaru Legacy models, the average MOT pass rate is 72.2% with a typical mileage of 86,036 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Subaru Legacy fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 11,876 recorded failures. If you're considering buying VK52 VJA, it's worth having these areas checked by a mechanic before committing.
The Subaru Legacy typically stays on UK roads for around 35 years. At 23 years old, this Subaru Legacy is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of VK52 VJA?
You can check the full history of VK52 VJA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was VK52 VJA registered?
VK52 VJA is a 2003 Subaru Legacy, first registered on 13 January 2003.
Is VK52 VJA safe to buy?
The MOT history for VK52 VJA shows 21 tests with a 71.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does VK52 VJA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on VK52 VJA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.