2003 Ford Ranger

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Front Body component likely to become detached Radiator mounts marked in yellow (6.2.1 (a) (ii)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Exhaust mounting defective (6.1.2 (a))

Front cross member corroded

Nearside Rear Nail in tyre ()

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Central Exhaust mounting defective (6.1.2 (a))

Front cross member corroded

Nearside Rear Nail in tyre ()

Front cross member corroded

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

surface corrosion to chassis across underside of vehicle

Nearside Front Headlamp insecure (4.1.1 (c))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Position lamp not working (4.2.1 (a))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near rear shackle mounting (5.3.6 (a) (i))

Front to rear metal brake pipes corroding

Front to rear metal fuel lines corroding

N/S front metal brake pipe corroding

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

O/S front metal brake pipe corroding

Registration plate lamp throwing direct white light to the rear fitted incorrectly (4.7.1 (a))

surface corrosion to chassis across underside of vehicle

Central exhaust mount bracket to box missing

Nearside Front brakes binding

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Headlamp aim too low (1.8)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Rear fog lamp missing (1.3.2a)

Offside Rear Rear fog lamp not working (1.3.2b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Central exhaust mount bracket to box missing

Nearside Front brakes binding

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Brakes imbalanced across an axle (3.7.B.5b)

Centre Exhaust system not adequately supported (7.1.1)

Nearside Headlamp insecure (1.7.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside front brake application uneven (3.7.B.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Exhaust has part of the system slightly deteriorated (7.1.1a)