2008 Peugeot 107

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Nearside Rear Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill (6.2.2 (d) (i))

Offside Front Lower Suspension arm pin or bush excessively worn back bush (5.3.4 (a) (i))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

underside corrosion

Brake pipe excessively corroded both brake pipes from back to front (1.1.11 (c))

Emissions unable to be completed due to misfire (8.2.1.2 (d))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust system insecure (6.1.2 (a))

Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

underside corrosion

Emissions unable to be completed misfire engine (8.2.1.2 (d))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust system insecure (6.1.2 (a))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front whel rim dented

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material FROM FLEXIBLE HOSE TO WHEEL CYLINDER (1.1.11 (c))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced OUTER SILL (6.1.1 (c) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material ONTO FLEXIBLE HOSE (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material FROM FLEXIBLE HOSE TO WHEEL CYLINDER (1.1.11 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake excessively binding (1.2.1 (f))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material FROM FLEXIBLE HOSE TO WHEEL CYLINDER (1.1.11 (c))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced OUTER SILL (6.1.1 (c) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material ONTO FLEXIBLE HOSE (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material FROM FLEXIBLE HOSE TO WHEEL CYLINDER (1.1.11 (c))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength shocker (5.3.6 (a) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Rear Exhaust emissions likely to be affected by an exhaust leak joint (8.2.1.1 (b))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced o/s floor (6.1.1 (c) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Integral body structure is corroded but structural rigidity is not significantly reduced o/s floor (6.1.1 (c) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust has a minor leak of exhaust gases rear joint (6.1.2 (a))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

wheel trim fitted to each wheel

Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Exhaust has a minor leak of exhaust gases rear joint (6.1.2 (a))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

wheel trim fitted to each wheel

Central Front Windscreen wiper blade defective (3.4 (b) (i))

Brake performance not tested not tested due to metal brake pipes condition (3.7.A.1)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Inner Suspension arm has excessive play in a pin/bush bonding failed (2.4.G.2)

Nearside Rear Brake pipe excessively corroded at flexi hose (3.6.B.2c)

Offside Front Inner Suspension arm rubber bush deteriorated resulting in excessive movement bonding failed (2.4.G.2)

Offside Rear Brake pipe excessively corroded at flexi hose (3.6.B.2c)

Exhaust has a minor leak of exhaust gases at rear clamp (7.1.2)

advise front brake discs excessivly pitted scored and corroded (both)

advise nearside front road wheel dented on inner face

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Electronic power steering warning lamp indicates a failure in the system (2.3.8)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases at tailpipe (7.1.2)

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

AirBag Light On