2016 Honda Cbr

Rear Brake binding but not excessively (1.2.1 (f))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Nearside Front Handlebar deformed but serviceable The left handlebar is slightly bent and nearer the fuel tank then the other side is. (2.2.1 (c) (i))

Steering headbearing slightly stiff or notchy headrace bearings have a slight notch in the centre forward position. (2.2.2 (f) (i))

Drive chain horseshoe locking device incorrectly fitted was fitted with the open end facing travel direction,this has been rectified (6.1.7 (j) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Nearside Front Handlebar deformed but serviceable The left handlebar is slightly bent and nearer the fuel tank then the other side is. (2.2.1 (c) (i))

Registration plate does not conform to the specified requirements correct size number plate had to be fitted over the top of the small one which didnt meet the correct spec. (0.1 (d))

Steering headbearing slightly stiff or notchy headrace bearings have a slight notch in the centre forward position. (2.2.2 (f) (i))

Headlamp not working on dipped beam headlight bulb was blown on the dip beam element,the bulb has been replaced with a new one. (4.1.1 (a) (ii))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Shock absorber has a slightly worn bush BOTH (5.3.2 (c))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Shock absorber has slight external damage to the casing corroded (5.3.2 (b))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Rear Brake grabbing severely (1.2.1 (c))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Shock absorber has a slightly worn bush BOTH (5.3.2 (c))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Shock absorber has slight external damage to the casing corroded (5.3.2 (b))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Rear Brake grabbing severely (1.2.1 (c))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Exhaust noisy (8.1.1 (a))

no plate light inop

rear brake fluid level close to minimum