2003 Mazda MX-5

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Brake hose slightly deteriorated nearside/offside (1.1.12 (b) (ii))

Rear Tyre worn close to legal limit/worn on edge nearside/offside (5.2.3 (e))

Registration plate deteriorated but not likely to be misread front/rear (0.1 (b))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Front Service brake imbalanced across an axle (1.2.1 (b) (i))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Rear Service brake imbalanced across an axle (1.2.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Outer Tyre slightly damaged sidewall (5.2.3 (d) (ii))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced underside (6.1.1 (c) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive anti-roll bar bush mount (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive anti-roll bar bush mount (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Suspension component corroded but not seriously weakened all (5.3.3 (b) (i))

Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced underside (6.1.1 (c) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive anti-roll bar bush mount (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive anti-roll bar bush mount (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Suspension component corroded but not seriously weakened all (5.3.3 (b) (i))

Nearside Rear Inner Road wheel slightly distorted rim (5.2.2 (c) (i))

Suspension component mounting prescribed area is corroded but not considered excessive offside & nearside front chassis (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded chassis under wing (2.4.A.3)

Offside Rear Braking system leaking brake caliper (3.6.A.1)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Tyre worn on inner edge.

Slight corrosion to rear brake pipes.

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Oil leak

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Oil leak

both rear tyres worn on outer edge

Horn not working (1.6.2a)