2005 Kia Sorento

Both underbody corrosion

Headlamp lens slightly defective Both (4.1.1 (b) (i))

steering rack slight seepage

Nearside Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill section (6.2.2 (d) (i))

Offside Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill section (6.2.2 (d) (i))

Headlamp lens slightly defective both (4.1.1 (b) (i))

Exhaust emissions exceed manufacturer's specified limit plate limit 0.80 failed 1.05 (8.2.2.2 (a))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension mount on rear axle (5.3.6 (a) (i))

Nearside Front Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill(holed) (6.2.2 (d) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (holed) (6.2.2 (d) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive suspension mount on rear axle (5.3.6 (a) (i))

Offside Front Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (holed) (6.2.2 (d) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (holed) (6.2.2 (d) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced all underside of vehicle (6.1.1 (c) (i))

sill covers fitted

Emissions unable to be completed (8.2.2.2 (e))

Exhaust has a major leak of exhaust gases Rear section broken off at the middle section joint (6.1.2 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

General corrosion to underneath and all suspension components

Nearside Front Tyre worn close to legal limit/worn on edge Inner edge (5.2.3 (e))

Nearside Side repeater lens defective which has no effect on emitted light Missing (4.4.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge Inner edge (5.2.3 (e))

Nearside Rear wheel arch inside door badly corroded, not testable area

Nearside direction indicator repeater lens missing

Nearside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear wheel arch extensive corrosion, not prescribed area

Brake pivot has restricted free movement on rear axle in 2 places (1.1.15 (e))

Nearside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear wheel arch extensive corrosion, not prescribed area

Front Headlamp has a product on the lens but not seriously reducing light output BOTH (4.1.4 (b))

Nearside Rear WHEEL ARCH CORRODED

Rear Registration plate lamp does not illuminate simultaneously with the position lamps both sides (4.7.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Power steering component has slight seepage from a component (2.1.5 (a))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Headlamp aim too low (4.1.2 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Power steering component has slight seepage from a component (2.1.5 (a))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Power steering component has slight seepage from a component rack (2.1.5 (a))

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Stop lamp not working (1.2.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Inner Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Front Exhaust system not adequately supported (7.1.1)