2004 Nissan Pickup

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis x3 (5.3.6 (a) (i))

Offside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Rear Brake pipe excessively corroded (1.1.11 (c))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))

Nearside Front Drag link end ball joint has slight play (2.1.3 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c))

Nearside Rear Shock absorbers missing (5.3.2 (a) (ii)) DANGEROUS

Nearside Front Drag link end ball joint has slight play (2.1.3 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Brake disc worn, but not excessively both sides (1.1.14 (a) (i))

Nearside Sidestep has a whole in centre underneath

Oil leak, but not excessive (8.4.1 (a) (i))

Spare tyre defective

Offside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Offside Outer Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Exhaust mounting defective (6.1.2 (a))

Trailer electrical socket wiring insulation damaged or deteriorated (4.10 (b) (i))

Offside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Offside Outer Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Exhaust mounting defective (6.1.2 (a))

Trailer electrical socket wiring insulation damaged or deteriorated (4.10 (b) (i))

Due to structure vehicle very hard to determine corrosion

Front Brake pad(s) wearing thin inner (1.1.13 (a) (ii))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside chassis has has extensive repair and very corroded / hard to determine

Rear Vehicle struggled to pass parking brake test

Vehicle very corroded

Headlamp aim too far to the left (4.1.2 (a))

Nearside Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember holed near shackle bush and very corroded (5.3.6 (a) (i))

Vehicle Identification Number not displayed (0.2 (a))

Due to structure vehicle very hard to determine corrosion

Front Brake pad(s) wearing thin inner (1.1.13 (a) (ii))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside chassis has has extensive repair and very corroded / hard to determine

Rear Vehicle struggled to pass parking brake test

Vehicle very corroded

Front Suspension arm corroded but not seriously weakened Both sides (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Previous work hindering proper inspection , chassis will need remedial work next year (6.1.1 (c) (i))

Offside Front Upper Suspension arm corroded and seriously weakened (2.4.G.1)

Offside Suspension component mounting prescribed area is excessively corroded o/s n/s centrar chassi (2.4.A.3)

Rear Vehicle structure excessively corroded within 30cm of towbar mounting o/s n/s (6.6.6)

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)