2006 Toyota Land Cruiser

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Tyre worn close to legal limit/worn on edge both wearing on the edges (5.2.3 (e))

corrosion evident on under body components and sub frame

no seats fitted in rear

suspension rubbers showing signs of weathering perishing

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Tyre worn close to legal limit/worn on edge both wearing on the edges (5.2.3 (e))

Stop lamp(s) not working (4.3.1 (a) (ii))

corrosion evident on under body components and sub frame

no seats fitted in rear

suspension rubbers showing signs of weathering perishing

Exhaust has a major leak of exhaust gases Backbox. (6.1.2 (a))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill excessively corroded. (6.1.1 (c) (i))

Rear Brake pad(s) less than 1.5 mm thick Inner brake pads. (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Brake pipe excessively corroded both front (1.1.11 (c))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Driver's view of the road through the swept area of the windscreen materially affected by an obstruction visor (3.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Suspension component mounting prescribed area is corroded but not considered excessive sills (5.3.6 (a) (i))

Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))

Offside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt inner (6.1.7 (g) (ii))

Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Lower Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive sills (5.3.6 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material to brake hose (1.1.11 (c))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm front bush (5.3.4 (a) (i))

Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material to brake hose (1.1.11 (c))

Offside Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm front bush (5.3.4 (a) (i))

Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake pipe corroded, covered in grease or other material centre to rear pipes (both) (1.1.11 (c))

Rear Exhaust has a minor leak of exhaust gases exhaust box (6.1.2 (a))

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis member (5.3.6 (a) (i))

Rear seats removed

fuel filler pipes showing corrosion

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material to brake hose (1.1.11 (c))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm front bush (5.3.4 (a) (i))

Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material to brake hose (1.1.11 (c))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm front bush (5.3.4 (a) (i))

Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake pipe corroded, covered in grease or other material centre to rear pipes (both) (1.1.11 (c))

Rear Exhaust has a minor leak of exhaust gases exhaust box (6.1.2 (a))

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis member (5.3.6 (a) (i))

Rear seats removed

fuel filler pipes showing corrosion

Exhaust has a minor leak of exhaust gases middle box (7.1.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

over plates fitted at time of test

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front Shock absorber has a light misting of oil (2.7.3)

third row seats not installed, seatbelts not fully inspected.

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Headlamp aim too low (1.8)

Rear fog lamp not working (1.3.2b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front Shock absorber has a light misting of oil (2.7.3)

All rear seats folded rear seat belts not fully checked.

Front brake discs corroded.

Rearmost row of seats folded therefore rearmost seat belts not accessible (NOT TESTED)