2006 Toyota Aygo

Engine MIL inoperative or indicates Warning on dash

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both Sides (5.3.4 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output Both Sides (4.1.4 (b))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened And Rear (5.3.3 (b) (i))

Nearside Front Stop lamp(s) slightly affected by the operation of another lamp (4.3.3 (b))

Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced under side Seal Both Sides (6.1.1 (c) (i))

under side corroded

Headlamp missing (4.1.1 (a) (ii))

under side corroded

Front Sound deadening material not fully secure (8.1.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Service brake binding but not excessively both (1.2.1 (f))

Front Sound deadening material not fully secure (8.1.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Service brake binding but not excessively both (1.2.1 (f))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

All direction indicators not working (4.4.1 (a) (ii))

Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Horn not working (7.7 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen wiper blade defective (3.4 (b) (i))

All direction indicators not working (4.4.1 (a) (ii))

Horn not working (7.7 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Front Exhaust system insecure (6.1.2 (a))

Nearside Front Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))

Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) DANGEROUS

Front Exhaust system not adequately supported (7.1.1)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front headlamp lens cloudy

Rear Child Seat fitted not allowing full inspection of adult belt BOTH

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Offside Front headlamp lens cloudy

Rear Child Seat fitted not allowing full inspection of adult belt BOTH

Exhaust noisy (7.1.4)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

clutch is worn

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Registration plate lamp not working (1.1.C.1d)

wiper blade starting to deteriorate

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

wiper blade starting to deteriorate

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)