2008 Honda Accord

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

heavy underbody corrosion

Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect lense cloudy (4.1.2 (c))

Nearside Rear Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect lense cloudy (4.1.2 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

heavy underbody corrosion

Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt both rear (5.3.4 (b) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

engine cover, undertrays and sill covers limiting inspection of some components

offside rear brake disc back plate/ dust cover is missing

Nearside Rear Service brake excessively fluctuating (1.2.1 (e))

Offside Front Lower Suspension arm pin or bush excessively worn foremost bush (5.3.4 (a) (i))

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

engine cover, undertrays and sill covers limiting inspection of some components

offside rear brake disc back plate/ dust cover is missing

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement foremost bush (5.3.4 (a) (i))

Service brake binding but not excessively offside and nearside rear (1.2.1 (f))

Service brake fluctuating, but not excessively offside and nearside rear (1.2.1 (e))

engine covers, undertrays and sill trims obscuring inspection of some components

offside rear brake disc back plate/ dust cover is missing

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

engine covers, undertrays and sill covers obscuring inspection of some components

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside rear outer sill (5.3.6 (a) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

engine covers, undertrays and sill covers obscuring inspection of some components

Nearside Rear Brake pad(s) wearing thin limited inspection (1.1.13 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Suspension component mounting prescribed area is corroded but not considered excessive nearside rear outer sill (5.3.6 (a) (i))

engine covers, undertrays and sill covers are obscuring inspection of some components

front brake imbalance limits just met

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing damage to outer wall (5.2.3 (d) (ii))

Suspension component mounting prescribed area is corroded but not considered excessive nearside rear outer sill (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive offside and nearside rear inner sills (5.3.6 (a) (i))

engine covers, undertrays and sill trims limiting inspection of some components

Nearside Front Lower Suspension arm pin or bush excessively worn foremost bush (5.3.4 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing damage to outer wall (5.2.3 (d) (ii))

Suspension component mounting prescribed area is corroded but not considered excessive nearside rear outer sill (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive offside and nearside rear inner sills (5.3.6 (a) (i))

engine covers, undertrays and sill trims limiting inspection of some components

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Rear Anti-roll bar rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

all brake discs have slight corrosion on faces

Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

all brake discs have slight corrosion on faces