2013 Mitsubishi Mirage

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced under side. (6.1.1 (c) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced under side. (6.1.1 (c) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced under side. (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced under side. (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened axel beam. (5.3.3 (b) (i))

both rear lower inner sills has corrosion but not seriously weakened.

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

fuel cap seal starting to perish

Front Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

fuel cap seal starting to perish

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

under trays fitted

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

under trays fitted

service due

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Fuel filler cap seal perishing

Rear Wiper blade split

Nearside Front Outer Brake pad(s) less than 1.5 mm thick (3.5.1g)