2001 Subaru Forester

Nearside Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

eng mill light on

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

eng mill light on

Under-trays fitted obscuring some underside components

engine mill light on

side sill with covers not fully checked

Rear fog lamp not working (1.3.2b)

Offside Headlamp aim too far to the right (1.8)

Under-trays fitted obscuring some underside components

engine mill light on

side sill with covers not fully checked

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)

Rear Exhaust Scilencer Deteriorating

Under-trays fitted obscuring some underside components

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)

Rear Exhaust Scilencer Deteriorating

Under-trays fitted obscuring some underside components

Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Anti-roll bar linkage fractured (2.4.G.1)

Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

rear exhaust box is very rusty.

Nearside Registration plate lamp not working (1.1.5c)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear registration plate obscured (6.3.1d)

Towbar locking device missing (6.6.3b)

a number of bulbs are out on the high level brake light.

rear exhaust box is very rusty.

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)