2006 Toyota Aygo

Front Headlamp has a product on the lens but not seriously reducing light output both headlamps (4.1.4 (b))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Hydraulic brake calliper insecurely mounted (1.1.16 (c) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Front Brake pad(s) wearing thin BOTH SIDES (1.1.13 (a) (ii))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Integral body structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Front Brake pad(s) wearing thin BOTH SIDES (1.1.13 (a) (ii))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Coil spring corroded all four (5.3.1 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Front Windscreen wiper blade defective (3.4 (b) (i))

Coil spring corroded all four (5.3.1 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Front Windscreen wiper blade defective (3.4 (b) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Sill damaged

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear NS&OS Undersealed

Front Headlamp lens slightly defective both (4.1.1 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Rear Stop lamp(s) not working both (4.3.1 (a) (ii))

Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sills (6.1.1 (c) (i))

Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Headlamp lens slightly defective both (4.1.1 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Coil spring corroded both (5.3.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Coil spring corroded both (5.3.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Headlamp lens slightly defective both (4.1.1 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced both sills (6.1.1 (c) (i))

Front Anti-roll bar damaged but not seriously weakened O/S N/S (5.3.3 (b) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement offside nearside (5.3.4 (a) (i))

Front Anti-roll bar worn but not seriously weakened o/s n/s (2.4.G.1)

Service brake efficiency only just met it would appear that the braking system requires adjustment or repair.

Front Anti-roll bar worn but not seriously weakened o/s n/s (2.4.G.1)

Offside Rear Stop lamp not working (1.2.1b)

Service brake efficiency only just met it would appear that the braking system requires adjustment or repair.

Front Anti-roll bar linkage has slight play in a pin/bush offside nearside (2.4.G.2)

service brake :service brake efficiency just met.it would appear that the brake system requires adjustment or repair.

Suspension component mounting prescribed area is corroded but not considered excessive front and rear o/s n/s (2.4.A.3)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Nail in offside rear tyre

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nail in offside rear tyre

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)