MOT Status
ValidMileage
97,418 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Integral body structure is corroded but structural rigidity is not significantly reduced general underside corrosion, also covered in sealer (6.1.1 (c) (i))
Nearside Front fog lamp damaged
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Front brake disc warped slightly
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front brake disc slightly warped
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front brake disc slightly warped
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre slightly damaged/cracking or perishing Outer sidewall (5.2.3 (d) (ii))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing Arm (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis leg (5.3.6 (a) (i))
Nearside Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive Inner Sill (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing Arm (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis leg (5.3.6 (a) (i))
Offside Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Suspension component mounting prescribed area is corroded but not considered excessive Inner Sill (5.3.6 (a) (i))
Offside Track rod end ball joint has slight play (2.1.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill & Chassis leg (5.3.6 (a) (i))
Offside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill & Chassis leg (5.3.6 (a) (i))
Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Corrosion around both rear chassis legs and inner sills
Corrosion around both rear chassis legs and inner sills
Offside Front Position lamp not working (4.2.1 (a) (ii))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Tyre pressure monitoring system warning lamp indicates a fault (4.1.D.4)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Tyre pressure monitoring system warning lamp does not illuminate (4.1.D.4)
Nearside Front Valve stem seriously damaged (4.1.D.1e)
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Parking brake: efficiency below requirements (3.7.B.7)
Parking brake lever has no reserve travel (3.1.6b) DANGEROUS
Tyre pressure monitoring system warning lamp does not illuminate (4.1.D.4)
Supplementary Restraint System warning lamp indicates a fault (5.4.2) DANGEROUS
Tyre pressure monitoring system warning lamp does not illuminate (4.1.D.4)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Parking brake lever has no reserve travel (3.1.6b) DANGEROUS
Tyre pressure monitoring system warning lamp does not illuminate (4.1.D.4)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
n/s/r anti roll bar linkage drop arm lower rubber cover split
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
VO58 VZC is a 2008 Mazda 6 in White with a 2,488cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 64%.
Across all 2008 Mazda 6 models, the average MOT pass rate is 71.4% with a typical mileage of 87,272 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying VO58 VZC, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 18 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of VO58 VZC?
You can check the full history of VO58 VZC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was VO58 VZC registered?
VO58 VZC is a 2008 Mazda 6, first registered on 23 September 2008.
Is VO58 VZC safe to buy?
The MOT history for VO58 VZC shows 25 tests with a 64% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does VO58 VZC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on VO58 VZC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.