2008 Citroen Xsara

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Upper Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

o/s outer sill corroded

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

o/s outer sill corroded

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Tyre worn close to the legal limit worn on outer edges (4.1.E.1)

rear exhaust box strap corroded

Front Tyre worn close to the legal limit worn on outer edges (4.1.E.1)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

rear exhaust box strap corroded

Front Tyre tread depth below requirements of 1.6mm both (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

advs rear bracket broken but not insurcure

Engine covers fitted obscuring some components in the engine bay

Offside Rear Lower Shock absorber has a slightly worn bush (2.7.4)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Under-trays fitted obscuring some underside components

particulate filter heat shield loose

Exhaust emits an excessive level of metered smoke (7.4.B.3a)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Engine covers fitted obscuring some components in the engine bay

Offside Rear Lower Shock absorber has a slightly worn bush (2.7.4)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Under-trays fitted obscuring some underside components

particulate filter heat shield loose

front brake pads wearing thin

rear exhaust silencer support previously welded , but secure at time of test

Exhaust emits an excessive level of metered smoke (7.4.B.3a)

both rear tyre sidewalls starting to perish/cracks appearing

rear exhaust silencer support previously welded , but secure at time of test

rerar wiper blade split

Both rear tyres perished on side walls.

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Both rear tyres perished on side walls.

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

neither of rear flexi brake hoses are clearly visable