2011 Vauxhall Combo

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Play in steering rack inner joint(s) ()

Steering rack has slight free play detected at steering wheel (2.3 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both inner and outer sills (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Play in steering rack inner joint(s) ()

Steering rack has slight free play detected at steering wheel (2.3 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both inner and outer sills (5.3.6 (a) (i))

play in steering column

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened nearside & offside (1.1.14 (a) (ii))

play in steering column

Front Shock absorbers light misting of oil or has limited damping effect nearside & offside (5.3.2 (b))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Exhaust has a major leak of exhaust gases rear section & brackets split (not insecure) (6.1.2 (a))

Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Front Shock absorbers light misting of oil or has limited damping effect nearside & offside (5.3.2 (b))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Steering linkage ball joint has excessive play Rack end/Steering arm (2.1.3 (b) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front both tyres deteriorating.

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Lower Steering column universal joint insecure (2.1.5)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Front both tyres deteriorating.

Front Tyre worn close to the legal limit BOTH (4.1.E.1)

Nearside Front Steering arm has relative movement at its fixings (2.2.B.1h)

Offside Front Steering arm has relative movement at its fixings (2.2.B.1h)

Offside Rear coil spring broken (2.4.C.1a)

Front Tyre worn close to the legal limit BOTH (4.1.E.1)

Nearside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Nearside Drag link end ball joint has excessive play (2.2.B.1f)

Nearside Rear coil spring broken (2.4.C.1a)

Nearside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Nearside Steering arm has relative movement at its fixings (2.2.B.1h)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)