2011 Ford Ka

Nearside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Nearside Rear exhaust silencer outer skin corroded

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Offside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear suspension on rear corroded

exhaust silencer corroded

Central Brake lever has insufficient reserve travel (1.1.2 (a))

Nearside Front Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Rear Brake hose ferrule excessively corroded both sides rear (1.1.12 (f) (i))

Nearside Front Macpherson strut likely to become detached (5.3.3 (a) (ii)) DANGEROUS

Offside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear suspension on rear corroded

exhaust silencer corroded

Nearside Rear exhaust silencer skin corroded

Brake fluid contaminated (1.8 (a))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Shock absorbers has negligible damping effect (5.3.2 (d))

Nearside Front Anti-roll bar linkage missing (5.3.3 (a) (ii)) DANGEROUS

Offside Front Brake disc in such a condition that it is seriously weakened metal to metal with pad (1.1.14 (a) (ii)) DANGEROUS

Offside Front Brake pad(s) less than 1.5 mm thick metal to metal with disc (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Tyre slightly damaged damage to outter wall (5.2.3 (d) (ii))

Nearside Rear exhaust silencer skin corroded

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

exhaust rear sections corroded

front suspension and/or steering knock present, no faults found at time of test but further investigation required

exhaust deteriorated

Nearside Front Shock absorbers light misting of oil or has limited damping effect borderline pass (5.3.2 (b))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Tyre worn close to legal limit/worn on edge worn on both edges and side wall getting soft and cracking.recommend replacement (5.2.3 (e))

nearside rear bump stop broken

Driver's view Items removed from driver's view prior to test Mirror hangers. (3.1 (a) (ii))

Nearside Front Road wheel slightly distorted Inner rim. Borderline MOT pass. (5.2.2 (c) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect Recommend replacement of front shock absorbers. (5.3.2 (b))

Offside Front Road wheel slightly distorted Inner rim. Borderline MOT pass. (5.2.2 (c) (i))

Offside Front Suspension arm ball joint has slight play Lower arm. Borderline MOT pass. Recommend replacement. (5.3.4 (a) (i))

Rear exhaust box corroded and blowing slightly.

Rear suspension springs corroded.

Slight buckle to both rear wheel inner rims.

Driver's view Items removed from driver's view prior to test Mirror hangers. (3.1 (a) (ii))

Nearside Front Road wheel slightly distorted Inner rim. Borderline MOT pass. (5.2.2 (c) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect Recommend replacement of front shock absorbers. (5.3.2 (b))

Offside Front Road wheel slightly distorted Inner rim. Borderline MOT pass. (5.2.2 (c) (i))

Offside Front Suspension arm ball joint has slight play Lower arm. Borderline MOT pass. Recommend replacement. (5.3.4 (a) (i))

Rear exhaust box corroded and blowing slightly.

Rear suspension springs corroded.

Slight buckle to both rear wheel inner rims.

Windscreen washer provides insufficient washer liquid Washers empty. (3.5 (a))

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)