2006 Mazda B Series

Brake load sensing valve inoperative but ABS functioning (1.1.17 (c) (i))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Headlamp aim projected beam image is obviously incorrect NS AND OS FADED AFFECTING BEAM IMAGE (4.1.2 (c))

Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced ENTIRE FRONT PANEL (BODY MOUNTING AREAS) HEAVILY CORRODED AND BREAKING UP!!! (6.1.1 (c) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL HOLED (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL HOLED (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL HOLED (5.3.6 (a) (i))

Windscreen wiper does not clear the windscreen effectively NSF AND OSF (3.4 (b) (ii))

Suspension component mounting prescribed area is corroded but not considered excessive BODY HAS ALL OVER CORROSION, ALSO COATED WITH RUSTPROOFING (5.3.6 (a) (i))

Underside corroded/coated with rustproofing , including over welded repairs

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Entire front panel heavily corroded and holed, also within body mounting areas (6.1.1 (c) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Fuel pipe leaking excessively or a risk of fire (JUST BELOW DRIVERS SEAT) (6.1.3 (b) (ii)) DANGEROUS

Underside corroded/coated with rustproofing , including over welded repairs

Front panel area corroded

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Underside coated

Front Brake hose has slight corrosion to ferrule n/s& o/s (1.1.12 (f) (i))

Front Brake pipe corroded, covered in grease or other material n/s & o/s (1.1.11 (c))

Front Tyre worn close to legal limit/worn on edge n/s & o/s (5.2.3 (e))

Fuel Pipe/s corroded ()

Offside Front Obligatory mirror slightly damaged (3.3 (b) (i))

Brake pipe excessively corroded all rear (1.1.11 (c))

Brake pipe excessively corroded both front to rear (1.1.11 (c))

Central Rear Stop lamp(s) with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii))

Front Service brake excessively binding n/s & o/s (1.2.1 (f))

Nearside Front Upper Suspension arm pin or bush excessively worn wishbone (5.3.4 (a) (i))

Offside Rear Leaf spring fractured (5.3.1 (b) (i))

Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS

Front Brake hose has slight corrosion to ferrule n/s & o/s (1.1.12 (f) (i))

Front Brake pipe corroded, covered in grease or other material n/s & o/s (1.1.11 (c))

Front Tyre worn close to legal limit/worn on edge n/s & o/s (5.2.3 (e))

Fuel Pipe/s corroded ()

Offside Front Obligatory mirror slightly damaged (3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake load sensing valve stiff (1.1.17 (c) (i))

Brake pipe slightly corroded front-rear (3.6.B.2c)

Nearside Front Direction indicator not working (1.4.A.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Leaf spring cracked (2.4.B.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Offside Registration plate lamp not working (1.1.5c)