2003 Ktm 450 Exc

Horn not working (7.7 (a) (ii))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Horn not loud enough to be heard by another road user (7.7 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened SCORED (1.1.14 (a) (ii))

Rear Brake pivot worn, but not excessively (1.1.15 (b))

Registration plate does not conform to the specified requirements DAMAGED/CRACKED (0.1 (d))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Horn not loud enough to be heard by another road user (7.7 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened SCORED (1.1.14 (a) (ii))

Rear Brake pivot worn, but not excessively (1.1.15 (b))

only used during daylight hours, and •  not used at times of seriously reduced    visibility

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Floor brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.C1b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front wheel bearings have excessive free play (2.3.5b)

Headlamp aim beam image kick up to the offside (1.6)

Headlamp aim too high (1.6)

Headlamp aim too high and too far to the left. (1.6)

Horn control not readily accesible. (1.7.2a)

Horn not loud enough to be heard by another road user (1.7.3a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Wheel has an excessively distorted bead rim. (4.2.2)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride split link clip worn away (6.2.1h) DANGEROUS

Rear Brake disc(s) is excessively distorted (3.2.A1m) DANGEROUS

Rear Brake pedal insecure (3.1.2a) DANGEROUS

Rear Wheel corroded significantly reducing the original strength rim damaged due to loose spokes needs replacing (4.2.1a) DANGEROUS

Rear Wheel spoke excessively loose several-needs new rim (4.2.1b) DANGEROUS

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

number plate cracked

Front wheel bearings are slightly rough (2.3.5b)

No indicators fitted at time of test

Number plate cracked

Rear shock absorber has a light misting (2.4.A.1c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear reflector on motorcycle missing (1.4.1)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front wheel bearings are slightly rough (2.3.5b)

No indicators fitted at time of test

Number plate cracked

Rear shock absorber has a light misting (2.4.A.1c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front wheel bearings have excessive free play (2.3.5b)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Exhaust noisy (7.1.2)

Exhaust mounting missing (7.1.1c)

Exhaust noisy (7.1.2)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear wheel bearings have excessive free play (2.4.A.2c)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front wheel bearings are slightly rough (2.3.5b)

Front shock absorber seal failed and leaking oil (2.3.3)

Rear wheel bearings are excessively rough (2.4.A.2c)

Rear wheel bearings have excessive free play (2.4.A.2c)