2002 Piaggio Zip

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

front damping reduced

Rear reflector missing (4.8.2 (a) (ii))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

front damping reduced

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp aim not tested (1.6)

Headlamp at least one does not illuminate on dipped beam intermittent light (1.2.2a(i))

Horn not working Horn doesn't operate properly, depending on steering angle (1.7.3a)

Rear Brake lever cannot be released smoothly (3.1.3d)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Riders seat insecure No lock on seat (6.2.1a)

Steering headbearing has excessive free play (2.2.2)

Throttle operating incorrectly (6.2.1f)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Offside Rear suspension bush deteriorated but not excessively swinging arm (2.4.A2a(i))

Steering headbearing has slight free play (2.2.2)

Offside Front Direction indicator not working (1.5.1c)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Offside Rear suspension bush deteriorated but not excessively swinging arm (2.4.A2a(i))

Steering headbearing has slight free play (2.2.2)

Front Brake disc(s) slightly worn (3.2.A1l)

Front suspension has a slightly reduced damping effect (2.3.6c)

Steering headbearing has slight free play (2.2.2)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Horn is not continous or uniform (1.7.3c)

Rear Floor brake test indicates a sticking brake (3.3.C2c)

Front Brake disc(s) slightly worn (3.2.A1l)

Front suspension has a slightly reduced damping effect (2.3.6c)

Steering headbearing has slight free play (2.2.2)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Floor brake test indicates a slightly juddering brake (3.3C2d.)