2006 Toyota Aygo

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Emissions unable to be completed major leak ,no emissions at tailpipe (8.2.1.2 (d))

Nearside Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Nearside Steering locking device missing track rod (2.1.3 (d))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Service brake binding but not excessively nearside and offside (1.2.1 (f))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Suspension component mounting repair covered in underseal OUTER SILL (5.3.6 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive inner + outer sill (5.3.6 (a) (i))

general corrosion

general corrosion

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive inner + outer sill (5.3.6 (a) (i))

general corrosion

general corrosion

Nearside Rear Service brake excessively binding (1.2.1 (f))

Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened offside and nearside (1.1.14 (a) (ii))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Exhaust has a minor leak of exhaust gases at joint to rear silencer (6.1.2 (a))

corrosion to all suspension components

general corrosion to underside of vehicle

Brake disc worn, pitted or scored, but not seriously weakened front and rear o/s andn/s (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced front to rear through out. and prescribed areas. (6.1.1 (c) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Suspension component corroded but not seriously weakened rear axle/ swinging arm. (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front to rear through out. (5.3.6 (a) (i))

Nearside Front Suspension arm ball joint excessively worn On shaker plate and with bar. (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a))

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

rear tyres slightly cracking on the tread, nearside rear starting to wear low towards its outer edge.

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

rear tyres slightly cracking on the tread, nearside rear starting to wear low towards its outer edge.