2008 Toyota Aygo

Front Brake pad(s) wearing thin o/s ,n/s (1.1.13 (a) (ii))

Front Headlamp has a product on the lens but not seriously reducing light output o/s ,n/s (4.1.4 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Outer Integral body structure is deformed but structural rigidity is not significantly reduced sill (6.1.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Service brake binding but not excessively o/s ,n/s (1.2.1 (f))

Nearside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Front Brake pad(s) wearing thin o/s ,n/s (1.1.13 (a) (ii))

Front Headlamp has a product on the lens but not seriously reducing light output o/s ,n/s (4.1.4 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Outer Integral body structure is deformed but structural rigidity is not significantly reduced sill (6.1.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Service brake binding but not excessively o/s ,n/s (1.2.1 (f))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Anti-roll bar pin or bush worn but not resulting in excessive movement n/s + o/s front anti role bar bushes slightly distorted (5.3.4 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing outer wall cracked (5.2.3 (d) (ii))

Anti-roll bar pin or bush worn but not resulting in excessive movement n/s + o/s front anti role bar bushes slightly distorted (5.3.4 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing outer wall cracked (5.2.3 (d) (ii))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Registration plate lamp does not illuminate simultaneously with the position lamps n/s+o/s (4.7.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Front Position lamp not working Nearside and offside (4.2.1 (a) (ii))

Nearside Side repeater not working (4.4.1 (a) (ii))

Rear Exhaust silencer insecure (8.1.1 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Suspension component pin or bush slightly worn (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Exhaust mounting defective Corroded + has a small leak of exhaust gases (6.1.2 (a))

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement n/s and o/s (2.4.G.2)

Front both tyres have sidewall damage

Offside Rear tyre has severe degreation

Nearside Rear Tyre worn close to the legal limit tyre also has severe degreation (4.1.E.1)

Front registration plate deteriorated (6.3.1d)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement n/s and o/s (2.4.G.2)

Front both tyres have sidewall damage

Offside Rear tyre has severe degreation

Nearside Rear Tyre worn close to the legal limit tyre also has severe degreation (4.1.E.1)

Front number plate damaged

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)