1983 Austin Mini

Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Steering pivot point has excessive play (2.2.B.1g)

Offside Rear Rear fog lamp not working (1.3.2b)

Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

exhaust centre rubbers split

o/s inner sill and chassis c orroded by o/s/f seat font mount

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Brake pivot locking device missing (3.5.1l)

Offside Front Wheel nut(s) loose (4.2.A.1e)

Offside Rear Brake pivot locking device missing (3.5.1l)

Offside Rear Radius arm has excessive play in a pin/bush (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

exhaust centre rubbers split

o/s inner sill and chassis c orroded by o/s/f seat font mount

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Horn not working (1.6.2a)

Indicator tell tale inoperative (1.4.A.2a)

Nearside Front Brake hose excessively damaged (3.6.B.4d)

Nearside Front Front position lamp(s) incorrect colour (1.1.A.3e)

Nearside Front Vehicle structure has a modification which adversely affects braking or steering (6.1.A.1)

Nearside Front Vehicle structure has damage which adversely affects braking or steering (6.1.A.1)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Headlamp aim too high (1.8)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Brake pivot has restricted free movement (3.5.1k)

Offside Radius arm has excessive play in a pin/bush (2.4.G.2)

Offside Radius arm severely distorted (2.4.G.1)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Steering wheel in a condition that hampers proper control (2.1.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

front brake application uneven (3.7.B.2)

front brakes release unevenly (3.7.B.4)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front wheel bearing has slight play (2.5.A.3c)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

exhuaust centre rub ber split

handbrake cable catching exhaust

Offside Radius arm has slight play in a pin/bush (2.4.G.2)

brake imbalance close to limits

drivers door lower hindge corroded

slight corrosion behind a pannels at top b/s

Brake pedal has insufficient reserve movement (3.3.A.5)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

front brake application uneven (3.7.B.2)

Offside Radius arm has slight play in a pin/bush (2.4.G.2)

drivers door lower hindge corroded

slight corrosion behind a pannels at top b/s

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Steering rack gaiter split (2.2.D.2d)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Shock absorber has negligible damping effect (2.7.5)

Rear rear brake recording little or no effort (3.7.B.5a)

Rear rear parking brake recording little or no effort (3.7.B.6a)

Service brake: efficiency below requirements (3.7.B.7)

front brake application uneven (3.7.B.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Direction indicators not in good working order (function impaired) (1.5.A1b)

Direction indicators not working (1.4.A.2c)

Emissions not tested (7.0)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust has a major leak of exhaust gases (7.1.2)

Hazard warning switch faulty (1.4.B.1d)

Nearside An item not tested (Manual)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Radius arm has excessive play in a pin/bush (2.4.G.2)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance (1.3.2d)

Rear fog lamp switch faulty (1.3.1a)

Registration plate lamp not working (1.1.5c)

Nearside Steering arm deformed but serviceable (2.2.C.1d)

Nearside Track rod end ball joint has slight play (2.2.B.1f)

both front jacking point exsesivly corroded but plated from inside

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Rear fog lamp missing (1.3.2a)

Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Service brake: efficiency below requirements (3.7.B.7)