2004 Honda CBF600

Front Horn not working (7.7 (a) (ii))

Exhaust has a minor leak of exhaust gases at cylinder head (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Upper Engine mounting/bracket damaged or deteriorated resulting in excessive movement Alloy spacers badly corroded (6.1.8 (a) (i))

Headlamp light intensity severely reduced Dipped beam (4.1.4 (a))

Rear Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Exhaust slightly deteriorated (7.1.1a)

Front Front wheel bearings are slightly rough (2.3.5b)

Motorcycle structure slightly corroded front engine mounts (6.1.1a)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust slightly deteriorated (7.1.1a)

Front Front wheel bearings are slightly rough (2.3.5b)

Motorcycle structure slightly corroded front engine mounts (6.1.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

front engine mounts deteriorated

Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake disc(s) excessively worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

front engine mounts deteriorated

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Nearside Front Front suspension assembly slightly corroded. (2.3.1)

Offside Front Front suspension assembly slightly corroded. (2.3.1)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Floor brake test indicates a binding brake (3.3.C2c)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering movement slightly 'notchy' (2.2.1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Brake component is slightly corroded (3.1.5)

Steering movement slightly 'notchy' (2.2.1a)

Drive chain worn but not considered excessive (6.2.1e)