2013 Mazda MPV

Front Lower Suspension arm ball joint dust cover severely deteriorated Both sides. (5.3.4 (b) (i))

Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Passenger seat(s) missing at time of test ()

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Rear fog lamp not working (4.5.1 (a) (ii))

Front Lower Suspension arm ball joint dust cover severely deteriorated Both sides. (5.3.4 (b) (i))

Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Passenger seat(s) missing at time of test ()

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

o/s and n/s headlamps poor condition

sill covers fitted on o/s and n/s sill

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Rear Body component corroded and likely to cause injury (6.2.1 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust mounting defective (6.1.2 (a))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

o/s and n/s headlamps poor condition

sill covers fitted on o/s and n/s sill

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

o/s and n/s headlamps poor condition

sill covers fitted to o/s and n/s sills

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

o/s and n/s headlamps poor condition

sill covers fitted to o/s and n/s sills

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

o/s and n/s headlamps poor condition

sill covers fitted to o/s and n/s sills

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

headlamps poor condition

sill covers fitted

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Fuel cap/sealing device ineffective (6.1.3 (b) (i))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

headlamps poor condition

sill covers fitted

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Rear fog lamp not working (4.5.1 (a) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

headlamps poor condition

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front All position lamps not working (4.2.1 (a))

Rear fog lamp not working (4.5.1 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

deep surface cracks on all 4 outer tyre walls

Offside Inner Rear position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Exhaust engine idle speed too high (7.3.D.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

engine managment warning light on

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

engine managment warning light on