2007 Jaguar Xf

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front arm inner bush (5.3.4 (a) (i))

Nearside Rear Upper Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front arm inner bush (5.3.4 (a) (i))

Offside Rear Upper Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened and components (5.3.3 (b) (i))

Offside Front Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords sidewall (5.2.3 (d) (i))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords multiple (5.2.3 (d) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front arm inner bush (5.3.4 (a) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge inner and outer edges (5.2.3 (e))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Upper Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front arm inner bush (5.3.4 (a) (i))

Offside Rear Upper Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened and components (5.3.3 (b) (i))

Nearside Front Power steering component has slight seepage from a component Steering rack (2.1.5 (a))

Nearside Front Tyre worn close to legal limit/worn on edge worn inner edge (5.2.3 (e))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Tie bar/rod ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Tie bar/rod ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Tie bar/rod ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Tie bar/rod ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Tie bar/rod ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Tie bar/rod ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

Both front tyres are low on edges

Both front tyres split on inside edge but not to cords

Tyre pressure monitoring system light flashing

Engine covers fitted obscuring some components in the engine bay

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Under-trays fitted obscuring some underside components

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Headlamp aim too low (1.8)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

OSR TYRE OUTER SIDEWALL HAS A SMALL CUT TO CHORDS WHICH IS LEAKING AIR.

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Under-trays fitted obscuring some underside components

Nearside Rear Road wheel cracked (4.2.A.1a)

Nearside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Offside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)