2008 Hummer H3

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Offside Windscreen wiper blade defective (3.4 (b) (i))

Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Fuel Pipe/s corroded breather pipe

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Axle has slight vertical movement between stub axle and axle beam both sides (5.1.2 (c) (i))

Suspension component corroded but not seriously weakened all rear components (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

all four tyres wearing unevenly developing flat spots

both front torsion bar rubbers split and perished

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Fuel Pipe/s corroded breather pipe

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Axle has slight vertical movement between stub axle and axle beam both sides (5.1.2 (c) (i))

Suspension component corroded but not seriously weakened all rear components (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

all four tyres wearing unevenly developing flat spots

both front torsion bar rubbers split and perished

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Fuel Pipe/s corroded

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced rear cross member/ spring hanger (6.1.1 (c) (i))

Nearside Front Inner Brake disc significantly and obviously worn contact surface (1.1.14 (a) (i))

Offside Front Inner Brake disc significantly and obviously worn contact surface (1.1.14 (a) (i))

Windscreen damaged and affecting the driver's view of the road zone A drivers view 10mm diameter or bigger (3.2 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Brake hose has slight corrosion to ferrule rigid section of flex hose (1.1.12 (f) (i))

Offside Front Brake hose has slight corrosion to ferrule rigid section of flex hose (1.1.12 (f) (i))

Rear Fuel Pipe/s corroded rigid section of evaporation pipe

Rear all rear section of chassis/rear cross member/spring hanger area needs maintenance before welding/repair is required

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' center (8.3.1a)

steering rack mounting bracket bush slightly worn allowing very slight movement

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

steering rack mounting bracket bush slightly worn allowing very slight movement

Nearside Front slight play steering/rack bush

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front slight play steering/rack bush

Offside Front Tyre worn close to the legal limit (4.1.E.1)

All position lamps not working (1.1.A.3b)

Offside Front All position lamps not working (1.1.A.3b)

Registration plate lamp not working (1.1.C.1d)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Brake pad(s) wearing thin (3.5.1g)