MOT Status
ValidMileage
120,747 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Horn not working (7.7 (a))
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Suspension component corroded but not seriously weakened front and rear (5.3.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Rear heat shield loose
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Side repeater not working (4.4.1 (a) (ii))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Headlamp aim too low (4.1.2 (a))
Offside Headlamp aim too low (4.1.2 (a))
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear tyre is unevenly worn
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear tyre is unevenly worn
How Reliable is the MG 6?
Based on 28,661 MOT tests across 2,640 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
VX62 HMV is a 2012 MG 6 in Silver with a 1,796cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 57.9%.
Across all 2012 MG 6 models, the average MOT pass rate is 74.6% with a typical mileage of 53,633 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a MG 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 191 recorded failures. If you're considering buying VX62 HMV, it's worth having these areas checked by a mechanic before committing.
The MG 6 typically stays on UK roads for around 15 years. At 14 years old, this MG 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of VX62 HMV?
You can check the full history of VX62 HMV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was VX62 HMV registered?
VX62 HMV is a 2012 MG 6, first registered on 7 December 2012.
Is VX62 HMV safe to buy?
The MOT history for VX62 HMV shows 19 tests with a 57.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does VX62 HMV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on VX62 HMV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.