2000 Honda VTR1000 F

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Direction indicator flashing more than 120 times a minute (4.4.4 (a))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Position lamp switch does not illuminate all position lamps with a single operation (4.2.2 (a))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

Direction indicator flashing more than 120 times a minute (4.4.4 (a))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Rear reflector missing (4.8.2 (a) (ii))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (7.1.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Nearside Exhaust mounting deteriorated. bolt missing (7.1.1.c)

Rear wheel bearings have slight free play (2.4.A.2c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Nearside Exhaust mounting deteriorated. bolt missing (7.1.1.c)

Rear wheel bearings have slight free play (2.4.A.2c)

CLUCH FLUID ON LOWER LEVEL

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

CLUCH FLUID ON LOWER LEVEL

Exhaust noisy (7.1.2)

Front Brake disc(s) has excessive run out (3.2.A1m)

Rear wheel bearings have excessive free play (2.4.A.2c)

Exhaust noisy (7.1.2)

Exhaust noisy (7.1.2)

Front Brake disc(s) has slight run out (3.2.A1m)

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Rear Drive chain sprocket slightly worn (6.2.1e)

Exhaust noisy (7.1.2)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))