2000 Vauxhall Corsa

Central Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (inner rear seat mount) (7.1.1 (a) (i))

Nearside Front Suspension component mounting prescribed area is inadequately repaired floor pan not welded (pop rivets used) (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is inadequately repaired outrigger not welded (nuts and bolts used) (5.3.6 (a) (i))

Nearside Rear Position lamp not working (4.2.1 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (rear spring mount) (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Sub-frame corroded and seriously weakened lower spring mount (5.3.3 (b) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired chassis spring mount (not continously welded) (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Windscreen damaged but not adversely affecting driver's view crack in zone 'A' (3.2 (a) (i))

front brake discs in poor condition

front brake pads appear low

Nearside Front Tyre worn close to the legal limit 2.5mm (4.1.E.1)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

brake disc worn, pitted or scored, but not seriously weakened both front (3.5.1i)

corrosion to nearside jacking point, not yet within a prescribed area

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit 2.5mm (4.1.E.1)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

brake disc worn, pitted or scored, but not seriously weakened both front (3.5.1i)

corrosion to nearside jacking point, not yet within a prescribed area

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

headlight image deteriorated

rear inner sills corroded

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Emissions not tested (7.0)

Nearside Rear position lamp(s) not working (1.1.A.3b)

headlight image deteriorated

rear inner sills corroded

Rear registration plate faded but not likely to be misread (6.3.1d)

Brakes imbalanced across an axle (3.7.B.5b)

Offside Front coil spring broken (2.4.C.1a)

Offside Headlamp not working on main beam (1.7.5a)

Rear registration plate faded but not likely to be misread (6.3.1d)

Nearside Rear Brake cable has wires broken and is significantly weakened (3.5.1b)

Offside Rear Brake cable has wires broken and is significantly weakened (3.5.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

Coolant leak

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Brake cable has wires broken but is not significantly weakened (3.5.1b)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Brake cable has wires broken but is not significantly weakened (3.5.1b)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear wheel bearing has slight play (2.6.2)

Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Nearside Headlamp aim too far to the left (1.8)

Nearside Headlamp insecure (1.7.3)

Offside Headlamp aim too low and too far to the left. (1.8)

Offside Headlamp insecure (1.7.3)

Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

Coolant leak

Nearside Brake cable has wires broken but is not significantly weakened (3.5.1b)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Brake cable has wires broken but is not significantly weakened (3.5.1b)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear wheel bearing has slight play (2.6.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

engine system malfunction warning lamp displaying

front brake discs slightly worn

front brake pads appear low

front tyres worn on inner edges

offside rear tyre perished in tread area

Centre Registration plate lamp not working (1.1.5c)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Headlamp aim too low (1.8)

Offside Front Headlamp insecure (1.7.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

front brake discs slightly worn

front brake pads appear low

front tyres worn on inner edges

offside rear tyre perished in tread area

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Shock absorber has negligible damping effect (2.7.5)

Offside Rear Shock absorber has negligible damping effect (2.7.5)

Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.3.D.1)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Stop lamp not working (1.2.1b)