MOT Status
ExpiredMileage
111,174 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Battery insecure (1.9.1)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp aim too low (1.8)
Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Road wheel badly damaged (4.2.A.1a)
Offside Front Road wheel bead rim badly distorted (4.2.A.1a)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a) DANGEROUS
Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear coil spring corroded (2.4.C.1b)
Oil leak
Parking brake lever has little reserve travel (3.1.6b)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Brake pipe slightly damaged (2.2.D.2b)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front Brake pipe seriously damaged (found during steering lock to lock check) (2.2.D.2b)
Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Brake pipe slightly damaged (2.2.D.2b)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Brake pad(s) wearing thin (3.5.1g)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both sills slightly corroded
front exhaust mounting broken (systym adequately supported)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
nearside rear chassis corrosion
Nearside Front Headlamp aim too low (1.8)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Direction indicator incorrect colour (1.4.A.2f)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Headlamp aim too low (1.8)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
nearside rear chassis corrosion
corrosion and patch repair to nearside sill
corrosion to both rear coil springs
corrosion to fuel filter
corrosion to offside and nearside inner sills
corrosion to offside and nearside rear metal brake pipes and unions
corrosion to offside front coil spring
corrosion to offside front floor
slight grinding noise detected from nearside rear wheel on brake check advise further inspection
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Oil leak
Offside Front Brake pipe slightly corroded (3.6.B.2c)
non obligatory mirror damaged
Front Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.B2)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Stop lamp not working (1.2.1b)
Rear Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Service brake juddering slightly (3.7.C.2)
Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
catalitic converter retaining bracket rusted
How Reliable is the Ford Fiesta?
Based on 33,753,820 MOT tests across 2,828,392 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
W112 HBX is a 2000 Ford Fiesta in Silver with a 1,299cc petrol engine. This vehicle has been through 12 MOT tests with a personal pass rate of 58.3%.
Across all 2000 Ford Fiesta models, the average MOT pass rate is 66.7% with a typical mileage of 64,944 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Fiesta fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 959,538 recorded failures. If you're considering buying W112 HBX, it's worth having these areas checked by a mechanic before committing.
The Ford Fiesta typically stays on UK roads for around 34 years. At 26 years old, this Ford Fiesta is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of W112 HBX?
You can check the full history of W112 HBX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was W112 HBX registered?
W112 HBX is a 2000 Ford Fiesta, first registered on 2 June 2000.
Is W112 HBX safe to buy?
The MOT history for W112 HBX shows 12 tests with a 58.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does W112 HBX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on W112 HBX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.