MOT Status
ExpiredMileage
187,788 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Front Brake pad(s) wearing thin (3.5.1g)
Injector blowing
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Upper Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Upper Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear exhaust system has corrosion
SRS Light on.
Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Front wheel bearing has slight play (2.5.A.3c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Upper Suspension component mounting prescribed area is fractured (2.4.A.3)
Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Front wheel bearing has slight play (2.5.A.3c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Outer Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Outer Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
advise nearside front fog lamp not working
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
advise lense cracked on offside front fog lamp
How Reliable is the Mercedes-benz E?
Based on 4,722,746 MOT tests across 435,734 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
W112 SAE is a 2000 Mercedes-benz E in Silver with a 2,155cc diesel engine. This vehicle has been through 14 MOT tests with a personal pass rate of 78.6%.
Across all 2000 Mercedes-benz E models, the average MOT pass rate is 72.7% with a typical mileage of 102,010 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mercedes-benz E fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 132,731 recorded failures. If you're considering buying W112 SAE, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz E typically stays on UK roads for around 33 years. At 26 years old, this Mercedes-benz E is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of W112 SAE?
You can check the full history of W112 SAE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was W112 SAE registered?
W112 SAE is a 2000 Mercedes-benz E, first registered on 7 June 2000.
Is W112 SAE safe to buy?
The MOT history for W112 SAE shows 14 tests with a 78.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does W112 SAE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on W112 SAE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.