2000 Vauxhall Corsa

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Headlamp reflector slightly defective (4.1.1 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Headlamp reflector slightly defective (4.1.1 (b) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner arch/sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill/arch (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front chassis (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front crossmember (5.3.6 (a) (i))

battery tray heavily corroded advise replace

rear tyres cracking

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner arch/sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill/arch (5.3.6 (a) (i))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Suspension component mounting prescribed area is corroded but not considered excessive front chassis (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front crossmember (5.3.6 (a) (i))

battery tray heavily corroded advise replace

rear tyres cracking

Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii))

Nearside Rear tyre perished/cracked

Offside Front Shock absorber has a light misting of oil (2.7.3)

exhaust system deteriorated

rear inner sill areas corroded

Nearside Front Tyre tread depth below requirements of 1.6mm 165/70 13 (4.1.E.1)

Offside Headlamp insecure (1.7.3)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear tyre perished/cracked

Offside Front Shock absorber has a light misting of oil (2.7.3)

exhaust system deteriorated

rear inner sill areas corroded

Offside Front brake hose ferrels corroded

Offside Rear lamp lens cracked

Rear shock absorbers weak

both rear tyres perished

corrosion to underside in places

fuel tank corroded

misting of oil around steering rack

slight corrosion to bulk head near brake servo unit

slight corrosion to exhaust system

corrosion underside of car in places

Rear Registration plate lamp not working (1.1.C.1d)

corrosion underside of car in places

battery tray corroded

brake ferrals corroded

corrosion underside of car in places

exhaust system corroded

exhaust system corroded

slight corrosion underside of car in places

Nearside Headlamp aim too far to the left (1.8)

Brake load sensing valve linkage stiff (3.6.E.3)

Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Wires on rear handbrake cables show corrosion

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Brake load sensing valve linkage stiff (3.6.E.3)

Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Wires on rear handbrake cables show corrosion

Brake load sensing valve linkage seized (3.6.E.3)

Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Steering column universal joint has slight play (2.1.5)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Exhaust has a minor leak of exhaust gases (7.1.2)

Steering column universal joint has slight play (2.1.5)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

bushes perishing

corrossion to bulkhead

oil leak

tyres perishing+wearing on edges+sidewall damage