2000 Ford Fiesta

Brake pipe slightly corroded (3.6.B.2c)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear wheel bearing has slight play (2.6.2)

Oil leak

Vehicle has heavy corrosion in several places

Body has a sharp edge caused by corrosion (6.1.C.1)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front coil spring broken (2.4.C.1a)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Brake pipe excessively corroded (3.6.B.2c)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front coil spring broken (2.4.C.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

front brake application uneven (3.7.B.2)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear wheel bearing has slight play (2.6.2)

Oil leak

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Vehicle has heavy corrosion in several places

Exhaust has a minor leak of exhaust gases (7.1.2)

Middle exhaust section corroded and weak

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside rear wheel arch slightly corroded

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside front top suspension mounting has slight play

Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Rear Sub-frame has excessive play in a pin/bush (2.4.G.2)

Nearside Rear coil spring broken (2.4.C.1a)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Rear Sub-frame has excessive play in a pin/bush (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Stop lamp remains on when the brakes are released (1.2.1e)

Exhaust has a minor leak of exhaust gases (7.1.2)

Middle section of exhaust corroded and weak

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside rear wheel arch slightly corroded

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside front top suspension mounting has slight play

Parking brake lever has little reserve travel (3.1.6b)

Spare tyre flat

Fuel pipe/s corroded

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Outer sills thin in places

Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Outer sills thin in places

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Fuel pipe/s corroded

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Brake hose excessively deteriorated (3.6.B.4d)

Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Offside Rear Brake hose excessively deteriorated (3.6.B.4d)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear rear brake recording little or no effort (3.7.B.5a)

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

front brake pads getting low

both front tyres close to limit on inner edge

nsf fog light glass cracked