2013 Bentley Continental

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Headlamp aim too high (1.8)

Offside Front Headlamp aim too high (1.8)

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

High Mounted stop lamp not working but cannot see connection on lamp

N/S/F and N/S/R tyres have cracking on tread but not showing plys or cords

N/S/R Elecronic park brake actuator cracked casing but not insecure

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

O/S/R brake bind a little higher than N/S/R but passed RBT test

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

High Mounted stop lamp not working but cannot see connection on lamp

N/S/F and N/S/R tyres have cracking on tread but not showing plys or cords

N/S/R Elecronic park brake actuator cracked casing but not insecure

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

O/S/R brake bind a little higher than N/S/R but passed RBT test

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

both rear anti roll drop links worn.

offside front tyre worn on inner edge and cracking between treads.

offside rear,nearside front and rear tyres slightly cracking between treads.

Offside Front Tyre worn close to the legal limit (4.1.E.1)

front and rear brake pads getting low

front brake discs coroded on inner and outer faces but passed roller test

high mounted stop lamp not working but cannot see if disconnected

nearside rear electronic park brake actuator housing cracked but operational

offside front tyre slightly worn on inner edge.

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

offside front tyre slightly worn on inner edge.

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

offside rear tyre down to 3mm

Nearside Inner Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Inner Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

offside rear tyre down to 3mm