2000 Mercedes-benz Sprinter

Front Vehicle structure has slight corrosion (6.1.A.1)

Oil leak

Rear Vehicle structure has slight corrosion (6.1.A.1)

all brake pipes slightly corroded

o/s/f tyre worn on outer edge

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Brake pipe slightly corroded (3.6.B.2c)

Nail in nearside front tyre

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside rear brake grabbing slightly (3.7.A.5b)

glowplug light on

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Brake hose slightly deteriorated (3.6.B.4d)

Rear Brake pipe slightly corroded (3.6.B.2c)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Rear Brake cable has wires broken and is significantly weakened (3.5.1b)

Front Brake hose slightly deteriorated (3.6.B.4d)

Rear Brake pipe slightly corroded (3.6.B.2c)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

engine under tray broken on corner insecure

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Front Direction indicators incorrect colour (1.4.A.2f)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.5c)

Nearside rear brake binding (3.7.B.1)

Offside rear brake binding (3.7.B.1)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

engine under tray broken on corner insecure

Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

anti slip slightly worn

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear brake disc cracked (3.5.1h)

Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Rear position lamp(s) incomplete (1.1.4a)

Rear registration plate has a feature which changes the appearance or legibility of the characters (6.3.4c)