2000 Ford Fiesta

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust has a major leak of exhaust gases center pipe (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

rear wiper blade worn

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Offside Front Tyre tread depth below requirements of 1.6mm inner edge 1657013 (4.1.E.1)

Nearside Front Tyre has ply or cords exposed inner edge (4.1.D.1b) DANGEROUS

rear wiper blade worn

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)

rear wiper blade worn

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Inner Brake pipe excessively corroded (3.6.B.2c)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seat mounting (6.1.B.2)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Headlamp aim not tested (1.8.A.1c)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

n/s front tyre worn on inner edge

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Inner Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Inner Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Inner Front Brake pipe excessively corroded (3.6.B.2c)

Offside Inner Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

n/s front tyre worn on inner edge

ns/ and o/s front tyres worn on inner edge

Offside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

ns/ and o/s front tyres worn on inner edge

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Headlamp aim too high (1.8)

Nearside Inner Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Headlamp aim too high (1.8)

Offside Inner Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Rear Shock absorber has negligible damping effect (2.7.5)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Shock absorber has negligible damping effect (2.7.5)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)