2000 Ford Mondeo

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

Nearside Rear Seat belt damaged but webbing not significantly weakened (5.2.2a)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Headlamp aim too high (1.8)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

Nearside Rear Seat belt damaged but webbing not significantly weakened (5.2.2a)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Suspension joint nearside lower dust cover split/missing

Suspension joint offside lower dust cover split/missing

offside front anti roll-bar link rod rubbers are split

An item not tested (Manual)

Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Headlamp aim too low (1.8)

Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Suspension joint nearside lower dust cover split/missing

Suspension joint offside lower dust cover split/missing

offside front anti roll-bar link rod rubbers are split

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Headlamp aim too high (1.8)

Nearside Rear Seat belt stitching badly frayed (5.2.2b)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear wheel bearing rough when rotated (2.6.1)

Rear registration plate delaminated (6.3.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Shock absorber has a slightly reduced damping effect (2.7.5)

Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Anti-roll bar linkage insecure (2.4.G.1)

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Nearside Front coil spring fractured (2.4.C.1a)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Headlamp aim not tested (1.8.A.1c)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Stop lamp not working (1.2.1b)

Offside Front coil spring fractured (2.4.C.1a) DANGEROUS

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

front link rods worn

front/rear pads half worn