2000 Honda Logo

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Headlamp insecure (4.1.1 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch area (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill area (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch area (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is inadequately repaired Inner wheel arch area fiberglass (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is inadequately repaired Sill area (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired Inner wheel arch area fiberglass (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired Sill area (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill area (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Sill area (7.1.1 (a) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Underside of vehicle very rusty

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Headlamp aim too high (4.1.2 (a))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Inner Brake pipe excessively corroded front to rear (1.1.11 (c))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Inner Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too low (1.8)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Both rear tyres close to wear indicators and worn on inner edges.

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Front registration plate character(s) incorrectly spaced (6.3.4a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Nail in nearside front tyre

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

both front tyres close to legal limit

Rear No. plate becoming deteriorated.