2000 Aprilia RX50

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Position lamp not working (4.2.1 (a))

Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Rear Brake lever pivot has excessive free play (1.1.1 (b))

Rear Rear reflector missing (4.8.2 (a) (ii))

Rear Stop lamp not working (4.3.1 (a) (ii))

Front Brake excessively binding (1.2.1 (f))

Front Upper Position lamp not working (4.2.1 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Chain guard missing ()

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Rear suspension bush has slight free play (2.4.A2a(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Chain adjuster bolts not touching adjuster brackets

Chain guard missing ()

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Fuel cap sealing washer missing (7.2.2c)

Rear suspension bush has slight free play (2.4.A2a(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Chain adjuster bolts not touching adjuster brackets

Brake lever is short but brake can still be readily applied (3.1.3c)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust mounting deteriorated. (7.1.1.c)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Wheel alignment slightly misaligned. (2.5.1)

no lights

Brake lever attachment screws missing (3.1.2b)

Brake lever is short but brake can still be readily applied (3.1.3c)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust mounting deteriorated. (7.1.1.c)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Wheel alignment slightly misaligned. (2.5.1)

no lights

No lights fitted at time of test

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Rear Drive chain sprocket slightly worn (6.2.1e)

Wheel alignment slightly misaligned. (2.5.1)

Steering control has reduced clearance at full lock not affecting the riders operation of the controls (2.1.2b)

Dipswitch does not deflect the main beam/s, making them into dipped beam/s (1.2.2b(ii))

Front Stop lamp remains on when the brake is released (1.3.1e)

Front shock absorber seal failed and leaking oil (2.3.3)

Rear reflector on motorcycle missing (1.4.1)

Front speedo cable needs adjusting as on free play.

Steering control has reduced clearance at full lock not affecting the riders operation of the controls (2.1.2b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Steering headbearing has slight free play (2.2.2)