2000 Suzuki GSF600

Motorcycle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Drive chain sprocket slightly worn (6.2.1e)

REAR SILENCER SLIGHTLY LOOSE AND NO CHAINGUARD FITTED

Front Headlamp aim too high and too far to the left. (1.6)

Rear Registration plate deteriorated (6.3.1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii)) DANGEROUS

Front wheel bearings are excessively rough (2.3.5b) DANGEROUS

Front wheel bearings have excessive free play (2.3.5b) DANGEROUS

REAR SILENCER SLIGHTLY LOOSE AND NO CHAINGUARD FITTED

Exhaust has part of the system missing (7.1.1a)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Headlamp aim too high (1.6)

Offside Rear Direction indicator not working (1.5.1c)

Exhaust excessively deteriorated (7.1.1a)

Exhaust is leaking and excessively noisey (7.1.1b)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Floor brake test indicates a binding brake (3.3.C2c)

Front Wheel has an excessively distorted bead rim. (4.2.2)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp aim too high (1.6) DANGEROUS

Offside Rear Direction indicator not working (1.5.1c) DANGEROUS

Drive chain slightly loose (6.2.1d)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.2)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

front and rear tyres are under-inflated

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

front and rear tyres are under-inflated